single home - new building

speedpipe indoor

Secure networks in the building.

In terms of their technical properties, speedpipe indoor stand up to all requirements. According to the EU Low-Voltage Directive 2014/35/EU the speedpipe indoor system entirely is tested in accordance with EN 61386-22, e.g.
• fire tests corresponding to the statutory security objectives
• regulations for installation and laying
• compatibility with firewalls
• speedpipe indoor are flame-retardant and tested according to EN 60684-2 with regard to the absence of halogens and EN 61034-2 with regard to low smoke density.

divisible indoor connectors

Connect occupied speedpipe indoor.

product details:
• hardly inflammable and halogen-free
• connect speedpipe indoor
• gas- and watertight up to 0.5 bar
• tensile
• divisible
• reusable
• easy and quick to install

House lead-ins

House lead-ins guarantee professional, reliable building sealing. Whether through the basement wall or above ground through the house wall: they can be installed quickly and safely and are gas- and watertight. The installation can be done in all common wall types.

Branch supports

The T-branch-support TBS or the L-branch-support LBS lead you to the customer or distribution box in a safe bend. Single speedpipe ground lead to the house from both directions of the speedpipe ground bundle - thus blowing-in is possible from each direction. Connect the branch supports with the speedpipe bundle ground and the branching speedpipe ground by using simple cable straps.

Divisible indoor seals with gas-stop

For secure networks.

product details:
• hardly inflammable and halogen-free
• connect occupied speedpipe indoor
• integrated gas-stop
• divisible and tensile
• gas- and watertight up to 0.5 bar (also in longitudinal direction)
• reusable
• easy and quick to install

speedpipe coil

speedpipe coils help to prepare and realize house connections efficiently.

- House branches from the speedpipe bundle can already be made when the main line is laid and can be laid on the property as required.
- The microduct can be laid from the speedpipe coil to the inside of the building for later connection.
- In areas where broadband expansion has not yet been completed, the speedpipe coil can be used to lay the microduct from the house to the street so that the microduct can then be connected to the main route at a later date. This means that new civil engineering work on private property can be avoided.