Thick-walled speedpipe ground single ducts in connection: SRV-G with cutting device
The increased admissible tensile force of speedpipe ground especially pays off in the tight relation of the existing capacity to the outer diameter of the speedpipe. Nevertheless, to use the residual space, a cutting device removes the lose duct coat before the drawing-in process. A pulling head that is directly placed on the ends of the speedpipe fixes the single ducts and guarantees an optimum focus of power - without taking more space in the duct. Thus also bundles with more than eight internal speedpipe or additional single ducts can be fed into the duct.
- A pulling head directly fixes the single speedpipe without increasing the outer diameter of the speedpipe bundle.
- A cutting device removes the flexible jacket pipe before reaching the duct system for minimizing friction losses.
- For higher ranges it is recommended to use lubricants and to help the spool rotating. - in practice for FTTB and FTTH.
Mainly use in practice of the microducts for blowing in fibre optics up to the building: FTTB and FTTH
Each subduct system only is as good as its resistance! For long usability and for the protection of your active network technologies gas-, dirt- and water-tight sealing and fixing elements are essential.