Skip
  • speedpipe-ground-rohrverband-einpfluegen.jpg

A cheap and quick variant for the new construction of fibre optic routes outside localities.

Quickly lay many kilometers of speedpipe.

The cable or duct plough lays a microduct system in one go: open the duct trench, insert the bundle, reconstruct ground cover.

Speedpipe Rohrverbaende Pflugverfahren

How it works

The SRV-G tc must be torn off the spool. Please particularly pay attention to a linear laying under tension (spool braked). Besides this laying provision please also consider eventually existing provisions of the manufacturer for ploughing in SRV-G tc, ducts or cables.

Gabocom speedpipe-ground Glasfaser einblasen

When can I use the ploughing method?

  • No consolidated road surface
  • No obstacles under the ground 
  • The position of external plants is known
  • No objections on the part of nature conservation
Benefits

Benefits

  • Very high output (up to 5 km per day)
  • GPS measurement during laying (elimination of additional surveying costs) Duct channel bedding with sand filling possible
  • Cost-effective € 8 to 10 per metre
  • Immediate restoration of the route
  • Minimal impact on traffic
  • Multiple laying of empty ducts possible

Source: Installation concepts in fibre optic expansion - Adams Consult (Whitepaper)

Impressions from practice

  • slider_dsc03928.jpg
  • slider_dsc03932.jpg
  • slider_dsc03935.jpg
  • speedpipe-rohrverbaende-einpfluegen.jpg
  • slider_dsc03945.jpg
  • slider_dsc03951.jpg

    Laying instruction & Whitepaper

    titelseite_verlegeanleitung_srv-g_srv-g_tc_en.jpg

    Laying Instruction for

    speedpipe bundle ground SRV-G / SRV-G tc

    whitepaper_adams-consult_laying-concepts-for-fibre-expansion.jpg

    Whitepaper

    Installation concepts in fibre optic expansion

    speedpipe bundles ground

    Even more practical use of the speedpipe system

    • slider_gabocom_speedpipe-ground_glasfaser-einblasen.png

      Blowing fibre optics into speedpipe

      The farther fibre optics can be blown into a microduct system, the less subsequent underground engineering is necessary. We show you what you need to be aware of.

    • speedpipe-rohrverband-srv-g-tc-einfraesen.jpg

      speedpipe bundles for trenching milling

      Milling method for speedpipe bundles ground for the new construction of duct routes.

    • speedpipe-rohrverband-srv-g-tc-offener-graben-bagger.jpg

      speedpipe bundles for open trench

      Laying SRV-G tc in the open duct trench is suitable for any terrain and any section of broadband expansion.

    • spuelbohrverfahren-05-bohrkopf-gabocom.jpg

      speedpipe bundles for directional drilling

      The horizontal directional drilling method offers particular advantages when the conditions make it difficult or impossible to use an open construction method.

      To Top
      Downloads
      Contact

      Any questions?

      Feel free to give us a call!
      or
      Use the contact form