01. Don’t damage the coil by lifting! 02. When lifting the coil don’t burden the speed•pipe® bundle ground! 03. Do not lay down the coil! 04. During transport never charge the lashing straps at the bundle! speed•pipe® bundle ground gabo Systemtechnik SRV-G und SRV-G tc Laying instructions 5 1. First indications. The speed•pipe® bundle ground and the internal speed•pipe® ground must be protected against contamination and mechanical damage during transport, storage and processing. Any damage and deformation of the speed•pipe® ground (e. g. ovalisation / crushing etc.) must be avoided and cause a decrease in the blowing distance of the micro cables. The speed•pipe® ground ends must be protected against the penetration of dirt and water by means of dust covers (protection against dust, dirt and splashing water, not pressure-tight), end plugs ES (pressure-tight up to 0.5 bar) or sealing elements EZA-t (pressure-tight up to 0.5 bar). When storing them over a long period of time (several months) the speed•pipe® bundle must be protected against direct solar radiation. The laying instructions are significant for the realisation of the construction and installation work. Note 1.1 Transport.
RkJQdWJsaXNoZXIy MTYzMjU=