speed•pipe® bundle ground gabo Systemtechnik SRV-G und SRV-G tc Laying instructions 29 By the flexible coating pipe (loose outer jacket) the SRV-G bundles are suitable for pulling into existing duct systems. Pay attention to the recommended tensile forces during pulling in bundles and speed•pipe® (see point 13). Never exceed the recommended tensile forces. Important By pulling into existing ducts bigger than 80 mm the complete speed•pipe® bundle with jacket pipe is installed. For the occupancy of existing ducts SRV-G can be pulled in by means of a cable grip. The maximum number of speed•pipe® bundles shouldn’t exceed the expected occupancy of 60 % to the inner cross section. jacket pipe Ø 40 jacket pipe Ø 32 jacket pipe Ø 50 speed•pipe® 7 x 1.5 speed•pipe® 10 x 2.0 SRV-G 32 / 6 x 7 SRV-G 40 / 8 x 7 SRV-G 32 / 4 x 10 SRV-G 40 / 5 x 10 SRV-G 50 / 10 x 7 SRV-G 50 / 7 x 10 SRV-G 50 / 5 x 12 SRV-G 40 / 4 x 12 SRV-G 32 / 3 x 12 SRV-G 50 / 4 x 14 SRV-G 50 / 5 x 14 SRV-G 40 / 3 x 14 SRV-G 50 / 4 x 16 SRV-G 40 / 3 x 16 speed•pipe® 12 x 2.0 speed•pipe® 14 x 2.0 speed•pipe® 16 x 2.0 12. Pulling SRV-G into existing ducts. 12.1 Pulling SRV-G into existing ducts (> Ø 80 mm).
RkJQdWJsaXNoZXIy MTYzMjU=