gabo Systemtechnik Laying instructions. 8 speed•pipe® bundle SRV 50 / 8 x 10 For cutting the SRV or the speed•pipe® never use chip-producing tools like a saw. Separate the bundle by means of a pipe cutter. The internal speed•pipe® must be separated with a speed•pipe® cutter. The cutting of the speed•pipe® for coupling it with a transparent permanent connector (DSM) must be carried out by a straight rectangular cut towards the pipe axis. Cut speed•pipe® that are not coupled with a transparent permanent connector (DSM) afterwards, immediately must be sealed against dirt and the penetration of water by means of a corresponding EZA-t or ES. Laying and notes. 4. Cutting speed•pipe® / SRV. speed•pipe® cutter and pipe cutter Please consider the respective assembly instruction for installing the connector. Note
RkJQdWJsaXNoZXIy MTYzMjU=