gabo Systemtechnik Laying instructions. 20 speed•pipe® bundle SRV 50 / 8 x 10 Laying instructions. 7.2 Requirements for achieving optimum blowing in lengths. THE MICRO CABLE / MINI CABLE. • The cable diameter should be within the specified diameter ranges (see table). • The cable diameter has a significant influence on the blowing in length. • The cable diameter should be uniform and should not vary for more than 0.3 mm. • The cable sheath should be as smooth as possible. • The surface of the micro cable should be dry and clean and should not exceed temperatures of more than 25 °C (ideal 15 °C). • The micro cable ideally has been optimised to the gabocom speed•pipe® and has been certified on a test track. • The cable shouldn’t have any axial run out. min. cable diameter* 3.0 mm max. cable diameter* 6.8 mm speed•pipe® 10 x 1.0 * Including tolerances
RkJQdWJsaXNoZXIy MTYzMjU=