gabo Systemtechnik Laying instructions. 19 speed•pipe® bundle SRV 50 / 8 x 10 Laying instructions. 7. Blowing in micro cables. For blowing in micro cables into the speed•pipe® that are integrated in the SRV we recommend a blowing in pressure up to 15 bar at speed•pipe®. Optimum blowing in values are reached at a temperature range from 5 to 20 °C. The cable to be blown in must not be exposed to direct solar radiation. It might also be helpful to use lubricants that are tested and recommended by specialist companies (e. g. Micro-Jettinglube, Vetter). 8 % blowing in team 15 % cables 20 % route planing 7 % weather (temperatures, humidity) 20 % laying (installation) 15 % micro ducts 15 % blowing in equipment (compressor, blowing in device, winding up of cables, lubricant) The blowing in lengths to be achieved depend on several factors. Laying instructions. 7.1 Dependence of the blowing in lengths to be achieved on several factors.
RkJQdWJsaXNoZXIy MTYzMjU=