gabo Systemtechnik Laying instructions. 16 speed•pipe® bundle SRV 50 / 8 x 10 Laying instructions. 6.5 Sealing and fixing the single speed•pipe® in the SRV. 1) Use a knife and crosscut the jacket pipe with approx. 15 - 20 cm protrusion to the wall of the manhole. 2) Put the inside stiffener (SHi 50) around speed•pipe®. 3) For shaping and stiffening purposes insert the SHi evenly into the jacket pipe. 4) Remove the eight sealing disc dummy plugs of the EZA-t 50 / 8 x 10 and put them around the speed•pipe®. Subsequently push them up to the jacket pipe (lubricants simplify the installation). 5) Put both housing shells around the jacket pipe and the sealing disc and then install the fixing clamps. 6) Installation of the EZA-t 10 on the speed•pipe® 10 x 1.0. EXECUTION STEPS:
RkJQdWJsaXNoZXIy MTYzMjU=