gabo Systemtechnik Laying instructions 5 speed•pipe® indoor Network level 4 Overview. 1. First indications. Protection from contamination and mechanical damage. The speed•pipe® indoor must be protected against contamination and mechanical damage during transport, storage and processing. Avoid damage and distortion. Any damage and deformation of the speed•pipe® indoor (e. g. ovalisation) must be avoided and cause a decrease in the blowing distance of the micro cables. The speed•pipe® indoor ends must be protected against the penetration of dirt and water by means of dust covers, indoor end plugs ES or indoor sealing elements EZA-t. Dust covers: protection against dust, dirt and splashing water, not pressure-tight Indoor end plugs: pressure-tight up to 0.5 bar Indoor sealing elements: pressure-tight up to 0.5 bar When storing them over a long period of time (several months) the speed•pipe® indoor must be protected against direct solar radiation. In principle avoid outdoor storage. It is impossible to make a general statement about the functional integrity of the speed•pipe® indoor, because the dimension of the particular speed•pipe® indoor as well as the related cable must be individually checked in combination. Please note: The laying instructions are important for the correct completion of construction and installation work.
RkJQdWJsaXNoZXIy MTYzMjU=