Products and solutions gabocom Accessories Chapter IV Accessories 116 4.5.1 Features and benefits • water impact classes according to DIN 18533: W1.1-E: Soil moisture and non-pressing water in floor slabs and walls in contact with the ground; W1.2-E: Soil moisture and non-pressing water in floor slabs and walls in contact with the ground with drainage • gas and water tightness: 1 bar • principle of sealing: integrated sealing element • installation in concrete wall: no auxiliary material needed • installation in hollow block: sanded sleeve House lead-ins ADSB are used for an easy house entry of speedpipe ground trough the cellar. House lead-ins ADSB gabocom offers two different sealing elements with protective bend: ADSB (single) and ADSB-D (double). Both versions include a inside- and outside-part with integrated sealing that allow the house lead-in of cables or speedpipe ground in the cellar. Without the use of tools - they are suitable for the application in environments with soil moisture or nonpressing water, gas- and water-tight up to 1 bar. The ADSB-F can also be installed in buildings without basement and can be installed with an installation angle of up to 30°. After the blowing-in process the speedpipe ground is fed into the integrated deflection pulley and lead along the cellar wall. From a wall thickness of over 400 mm upwards or in hollow block, the additional use of the sanded sleeve is recommended. House lead-ins ADSB/ADSB-D/ADSB-F. LEAD SPEEDPIPE INTO THE HOUSE VIA UNDERGROUND ACCESS.
RkJQdWJsaXNoZXIy MTYzMjU=